Locomotive Interface/E24
DCCWiki, a community DCC encyclopedia.
This is new interface from ESU. Not much detail is known about it at this time. It uses a J3200 connector that was used on the iPhone 6's camera. This is not a proprietary connector, it just hasn't been through the standardization process yet.
It is mainly used in their multifunction decoders designed for N Scale applications. It allows a lower profile and more connections than the Next18 interface. The ESU 53900 decoder tester includes this interface.
It is found on the LokSound 5 Nano, and the forthcoming LokPilot Nano. Digitrax has announced their SDXN1137E24 Series 7 DCC Sound Decoder with an E24 interface.
Pinout
E24 Pinout | |||
---|---|---|---|
DCCWiki.com | |||
Molex 5050702422 | |||
Function | PIN | PIN | Function |
Track Left | X1B | X1A | Track Left |
P AUX11/SUSI Data | 24 | 1 | Speaker – |
P AUX12/SUSI Clock | 23 | 2 | Speaker + |
GND | 22 | 3 | GND |
P AUX3 | 21 | 4 | Motor - |
P AUX4 | 20 | 5 | |
P AUX10/Sensor | 19 | 6 | Motor + |
VCC | 18 | 7 | |
U+ | 17 | 8 | V+ Cap |
AUX 5 (Power) | 16 | 9 | LampF (Power) |
AUX 6 (Power) | 15 | 10 | LampR (Power) |
AUX 7 (Power) | 14 | 11 | Aux 1 (Power) |
AUX 8 (Power) | 13 | 12 | Aux 2 (Power) |
Track Right | X2B | X2A | Track Right |
Note: AUX3, AUX4, AUX10 - 12 are logic level (0-5V) outputs. All others are powered.
Source
- ESU Data Sheet. No warranties expressed or implied as to the accuracy of the table.